by There are so many mirrorless cameras available in the market, but when it comes to Fujifilm X-T3, there is hardly any competition. It is one of the best cameras that you can purchase. There are so many advanced features and sensors in the camera which deliver you a result that is a lot better than you generally expect out of the camera.
Now, when it comes to such an advanced camera, it is obvious that you should use a gimbal which is equivalent to the performance of the camera. All the gimbals that are mentioned in the list given below are those you can buy for your Fujifilm X-T3, and no matter which one you choose, it will turn out to be extremely compatible.
We have researched the best on our part, so you don’t have to. Without wasting much time, let’s just head straight toward different gimbals and how you can use them with your Fujifilm X-T3.
Fujifilm X-T3
- It is a 26.1 MP mirrorless camera
- It has X-Trans CMOS 4, APS-C sensor, which proves great when it comes to its performance
- There’s a 3-inch screen which helps you manage the camera
- ISO sensitivity of 51200, which drives the great clarity
- The camera has pixels of 26m leading to an HD image
- Looking into the software, the camera operates on the Firmware version 3.10
- Its Viewfinder of 3.69- million dots provides a high-resolution magnification ratio of 0.75x
- Looking at a display lag time of 0.005 seconds which is quite impressive when met with the refresh rate of 100fps
- The camera functions on X-processor 4, which is a great performance
Note:
All the gimbals mentioned here are tested with Fujifilm X-T3 and work perfectly fine.
| DJI RS 3 (Best Overall)
 
|
| DJI RS 3 Pro (Most High-end - Highest Payload Capacity & Comes with Advanced Features)
|
| FeiyuTech SCORP-C (Budget Pick)
|
| MOZA AirCross 3
|
Best Gimbal for Fujifilm X-T3
1. DJI RS 3
If you are keeping tabs on all the gimbals that recently launched in the market, we are sure you might have heard the name of the recent launch by DJI. The gimbal is a continued RS series, and it is the 3rd upgrade.
There are basically two new models, but here we are going to talk about DJI RS 3. It is everything that you can ever want in your gimbal when you want to use it for Fujifilm X-T3. The price of the gimbal stays somewhere between costly and pocket-friendly.
You can always go ahead and purchase this gimbal without much worry, as every penny you spend on this will be worth it.
We have used the Fujifilm X-T3 attached to this gimbal and tested it differently. There was just a slight bit of an issue with balancing the camera for the first time, but once we got the hang of it, it was great.
The gimbal is quite comfortable to carry and easy to use. You will not have to worry about it much if you have been used to using the gimbal. The weight of the gimbal is 1.5 kg, and it has the capacity to hold about 4 kg.
There’s even a 3rd gen RS stabilization algorithm, which ensures that no matter wherever you are using the gimbal, it will give you a highly stabilized shot. We are pretty much impressed with the 1.8-inch OLED screen to help you handle the different modes.
Another concern might be about the battery. Now, we also know that the Fujifilm X-T3 camera is a dynamic camera, so you are supposed to need a gimbal that has a great battery runtime. DJI RS 3 even meets the requirement, and it lasts about 12 hours.
Pros
- There’s a LiDAR focusing on the gimbal; with this technology, you will get the best results.
- We are impressed with how easily you can operate your gimbal remotely.
- It supports quite the payload, which is about 4 kg.
- The battery runtime of the gimbal is about 12 hours which is pretty sufficient.
Cons
- It might seem costly to photographers looking for a basic gimbal.
2. DJI RS 3 Pro
There are also some gimbals that are quite a bit more advanced than the previous one. DJI has recently launched two gimbals, and this one is the most advanced and professional one among them.
What matters the most is if you are a professional photographer and using Fujifilm X-T3 for professional purposes, this gimbal is definitely the right choice for you.
Looking at it, it has certain drawbacks about weight and having to maintain it for proper setup, but apart from that, there’s nothing you should be worried about.
The weight of the gimbal is about 2 kg, and it has the capacity to handle 4.5 kg of weight if you are handling such a weight and have a camera attached to it, which slightly weighs about half a kg. Probably with a lens, it will go up to the total weight of 1 kg.
You might have to handle the gimbal with two hands because of that. It is also equipped with LiDAR focusing on about 14 meters, with a focus on Fujifilm X-T3; we are sure that this is the combo you will be impressed with.
Because it is one of the latest gimbals, it lets you connect multiple accessories to it, so there’s no restraint for different experiments while you are shooting.
There are many ways you can attach your camera to it, be it wire or wireless. We are pretty much impressed with how much less time it takes for you to set up your camera in it once you have figured it out.
The mounting plates of this gimbal are designed for such a reason. The main aim of this gimbal is to provide professional performance with ease of use and meet the expectations of the customers who use it.
Pros
- The battery runtime of the gimbal is like 12 hours, which is considered pretty good.
- The mounting plates are designed to last.
- It is equipped with LiDAR focusing up to 12 meters, so you never get a click which is not perfect in focus
- Has the good payload capacity
- The gimbal is compact and easy to use
Cons
- Compared to other gimbals in the market, this one is priced in the premium range.
- The weight of the gimbal, camera and accessories attached to it might require you to hold it with two hands.
3. FeiyuTech SCORP-C
As a photographer, vlogger, or videographer, the choice that you have to make about your camera equipment is crucial, and we understand that. Among one of the most stable and sturdy gimbals, Scorp-C can be considered one of the tops on the list.
It is well-adored because of how compact it is and how easily it can be used with just one hand. You can easily operate the 3-axis with this gimbal. We have tried and tested. It impressed us with its smooth movement, especially with cameras like the Fujifilm X-T3.
The gimbal is extremely lightweight as it weighs less than 1 kg, and it has the capacity to hold about 3 kg without breaking a sweat. Despite its low weight, you can easily mount a lightweight camera on an easy-to-adjust mounting plate.
The main purpose of getting a gimbal is to stabilize the shot that you are trying to capture, and FeiyuTech Scorp-C meets that requirement at an extremely affordable price. You will be amazed at how great the price of the gimbal is.
Although this gimbal is designed for casual photographers, many professional photographers prefer to use it because of its performance and ease of use.
Just like every other gimbal that you purchase, it will take you some time to set up this gimbal, but once you have done it, you will get the best performance possible.
If you are a vlogger and you are looking for an affordable gimbal, this one is quite the right choice, as you will be able to switch to selfie mode real quick. But do not limit this gimbal just to that; it can be used for almost every other kind of photography you want.
Pros
- Comes at a highly pocket-friendly price
- Highly compatible with cameras like Fujifilm X-T3
- Light in weight and compact
- Balancing your camera on this gimbal is extremely easy
- It charges really fast and gives you long hours of runtime
Cons
- It comes with only 1-year of warranty
- If you want to operate this gimbal remotely, you might face some issues with the app
4. Moza Aircross 3
We have one more gimbal on our list, which is sure to impress you. Although, all the gimbals that we selected for you are exceptional. The last one on our list is Moza Aircross 3. This is also one of the latest gimbals that you can get.
Moza has made some upgrades to its previous model and launched this. So whatever it was that you wanted to be improved in Moza Aircross 2, rest assured that this upgrade will have it.
It is lightweight, easy to use, and among all, you can, without a fuss, switch between different modes of shooting.
The mounting of your camera on the gimbal is quite easy and with multiple options available. You can just slide in your Fujifilm X-T3 and tighten the three mounting plate screws, and you will be good to go.
It makes the camera stay highly stable on the gimbal, and you will not have to worry about your camera falling off the gimbal at all.
Looking at its performance, there’s no question about how great it is. You will be impressed with how fast the Aircross 3 can be charged and how it will give you a runtime of up to 18 hours.
Well, it also depends on the accessories you use with it. We also like its performance with the app; it lets you easily handle the gimbal remotely without much of a lag.
The price of this gimbal falls somewhere between the middle category where you are not much more, and you are also not paying cheap. The payload capacity is also sufficient, considering you want to stabilize mirrorless cameras like Fujifilm X-T3 on it.
Pros
- Aircross 3 is a highly stabilized gimbal, even when you are optimizing full payload capacity
- The build quality of the gimbal is long-lasting and is worth each penny you spend on it
- It is a lightweight gimbal that is also very easy to use.
- Mounting your camera on the gimbal is hassle-free
- Battery runtime is impressive, and as a bonus, it also charges really fast
Cons
- It is not very compatible with DSLR cameras, and it might take you some time to balance one on this gimbal
- Wireless connections of the camera to the gimbal have an opportunity for improvement
- This gimbal is not very compatible with mobile phones.
It’s time you learn a little bit about the Fujifilm X-T3 before we head toward the different gimbals that you can get.
Fujifilm X-T3
In recent years, among the most recently launched cameras has a really great APS-C sensor. If you are looking to get a camera that is quite versatile and even great when it comes to long-lasting, great build, Fujifilm X-T3 is a great choice.
You can get a whole kit at quite an amazing price. Although you will have to pay a little more than you usually do for a camera, every penny you spend on it is worth it. It is a total upgrade of X-T2, and you will get everything you need for your mirrorless camera.
It is a versatile camera that you can use in any weather, and as the cherry on top, it is easy to carry anywhere. There are different ways you can attach your accessories to it.
There’s a headphone jack, mic attachment input, and USB-C cable, and there’s also always Bluetooth you can attach your camera to.
The camera is made with a magnesium alloy body which makes it a long-lasting camera. What we noticed was that it charges really fast, and the battery of the same will last you for quite a long time.
What matters is the performance of the camera, and this mirrorless camera from Fujifilm meets the requirement. Once you start using this camera, you will be greatly impressed with how easily its shutter speed and ISO locks in.
It ensures that you do not change the settings of the camera mistakenly.
There are just so many features of this camera that it will not fail to impress you with its great performance. What makes this camera different than others is its long-lasting build and its even greater performance.
Getting a gimbal for this camera is the best thing you can do. To ensure that you are choosing the correct gimbal for your X-T3, we have researched the best from our part, so you don’t have to.
Without wasting much time, let’s just head straight toward different gimbals and how you can use them with your Fujifilm X-T3.
What should you look for in a gimbal for Fujifilm X-T3?
There are always so many factors that affect what choice you have to make for your camera. When looking at the gimbal specifically for a camera, you have to look for specific features such as build, runtime, etc. For now, particularly, we are looking for a gimbal for Fujifilm X-T3. Let us see what features you should see and how those are compatible with your camera.
Compatibility- What we have realized is that when it comes to Fujifilm X-T3, almost all the gimbals fit perfectly well. There are many ways you can figure out how the gimbal meets the requirements of your camera. There are so many gimbals that were just dismissed because they were not quite compatible with a few cameras. All of the gimbals mentioned above are highly compatible gimbals with Fujifilm X-T3. You can check the list of compatible cameras for the gimbal you are interested in. The compatibility is defined by how easily you can operate your camera features while using a gimbal.
Payload capacity- This has to be another one of the most important parts that you will have to check before you purchase your gimbal. Given the weight of the Fujifilm X-T3 is about half a kg, you will also have to consider that you will have to put some accessories on it. So when you are considering purchasing a gimbal for X-T3, you will have to consider all of it together. What matters the most is that you end up choosing a gimbal that can meet this requirement. What we have observed is that you should look for a gimbal that you will not have to worry about balancing for stability.
Battery runtime- For some photographers, battery runtime is one of the most important things to look out for, and for some photographers, it might not be the case. To be honest, which gimbal you get and what battery runtime you prefer depends on your area of expertise. Before you choose a gimbal for X-T3, you have to ensure that you are looking into it. Some gimbals have a battery runtime of about 12 hours and whereas some gimbals have a battery runtime of even 21 hours.
Stability and camera mounting- Although you might sometimes miss seeing the point of this particular thing before you purchase your gimbal. It is still considered one part that you must focus on. Some cameras with some gimbals are very easy to stabilize, and for some gimbals, it is a kind of tough sport. You have to ensure that the gimbal you are getting perfectly stabilizes your camera. A lot of this has to do with how the camera is mounted on the gimbal. There are even some gimbals that let you switch between horizontal and vertical modes to give you the ease of capturing a shot, and you can always consider that if that’s part of your priority.
How to mount Fujifilm X-T3 on gimbal?
There are a few simple steps that you can follow to figure out how you can set up your camera. There are always a few different steps in some of the gimbals than others, but most of the gimbals have the same steps. We have this process defined which will help you a big deal. You can follow the below-mentioned steps to mount Fujifilm X-T3 on a gimbal.
- There is a mounting plate of the gimbal you will have to attach to the camera.
- Once the mounting plate is attached, some cameras have hot shoe plates that you can attach to your mounting plate.
- After everything is set, you can easily attach your gimbal to the camera.
Although, now the real work of balancing your camera on a gimbal begins.
- To ensure that your camera is fitted, you will have to tighten the screws.
- After tightening the screw, you have to check how balanced your camera is by connecting it to the gimbal.
- There are many ways that you can connect your gimbal to your camera, but one of the most useful ways to do this is by connecting your gimbal to USB-C.
You can test drive your gimbal after doing a thorough checkup on how your camera is performing with the gimbal, and you will be good to go. Always keep in mind to read a manual for the gimbal that you have got, as there might be some different steps that you will have to follow.
Final Thoughts
There are so many options when you start looking for one gadget but what matters is you end up purchasing the right one. Now, we prioritize giving you sufficient information so that you can make your choices.
We have researched each gimbal mentioned above and tested all of them one by one with Fujifilm X-T3. They all turned out to be exceptional. Do not let the cons of the gimbal remove your focus from the great performance of each one of them.
Now, what matters the most is you choose one among the above-mentioned gimbals based on your needs. If you have many cameras, you can check the compatibility of the gimbal with them.
If you want to use accessories, you can also check the performance with them attached. We have worked on it for you, so you don’t have to. Every detail mentioned in this article is well-researched and compiled, and we hope it will help you choose the best gimbal for Fujifilm X-T3.
